BetaFPV Pavo20 PRO II 4S Whoop für DJI O4 (BNF ELRS 2.4GHz)
Powerful 2.2-inch 4S cinewhoop with ELRS 2.4 GHz, compatible with DJI O4, O4 Wide and O4 Pro Air Units (not included).
The BetaFPV Pavo20 Pro II 4S is a compact and powerful 2.2-inch cinewhoop specifically designed for freestyle flying and high-quality FPV footage. It is compatible with the DJI O4, O4 Wide and O4 Pro Air Units and comes without a video system, allowing you to install your preferred DJI O4 system.
The 4S version combines powerful LAVA 1104 brushless motors with 5500 KV and specially matched Gemfan D2.2 3-blade propellers with the new Cube 2-4S 30A Flight Controller. This combination delivers responsive flight characteristics, excellent agility and efficient power delivery. According to the manufacturer, the Pavo20 Pro II achieves a flight time of up to 10 minutes and 30 seconds with a LAVA II 4S 680 mAh battery.
The redesigned Pavo20 Pro II frame features a reinforced structure with a practical 4-screw mounting system, providing excellent rigidity and easy assembly. According to the manufacturer, the aerodynamically optimized design improves thrust efficiency by 8–11%. The vibration-dampened DJI O4 Pro camera mount reduces vibration transmission and helps achieve smooth video footage.
Additional features include an integrated ELRS 2.4 GHz receiver, a buzzer for easier drone recovery and a NightFire RGB LED strip. Two included GPS mounts also allow the installation of a compatible GPS module.
Features:
- 4S Power System: LAVA 1104 brushless motors with 5500 KV and Gemfan D2.2 3-blade propellers for powerful and precise flight maneuvers.
- DJI O4 Compatibility: Supports DJI O4, O4 Wide and O4 Pro Air Units. The video system is not included.
- Powerful Flight Controller: Cube 2-4S 30A 3-in-1 FC with STM32G473 processor, integrated 30A ESC and ELRS 2.4 GHz receiver.
- Extended Flight Time: Up to 10 minutes and 30 seconds with a LAVA II 4S 680 mAh battery (manufacturer's specification).
- Optimized Frame: Reinforced PA12 construction with aerodynamically optimized propeller guards and a simple 4-screw mounting system.
- Vibration-Dampened Camera Mount: The DJI O4 Pro camera mount reduces vibrations and offers an adjustable camera angle of 0–40°.
- Screw-Secured Propellers: The Gemfan D2.2 3-blade propellers are additionally secured with screws for a reliable fit.
- Integrated Buzzer: Makes it easier to locate the drone after an unexpected landing.
- GPS Compatible: Two included mounts allow the installation of a GPS module (not included).
- NightFire RGB LED Strip: Features various colors and lighting modes for improved visibility.
- ND Filter Compatible: The DJI O4 Pro camera mount supports the use of suitable ND and UV filters.
Specifications:
- Weight: 72.6 g (without battery and FPV system)
- FC & ESC: Cube 2-4S 30A AIO
- Frame: Pavo20 Pro II Brushless Frame
- Motors: LAVA 1104 5500 KV
- Propellers: Gemfan D2.2 3-blade propellers (1.5 mm shaft)
- VTX & Camera: None (compatible with DJI O4, O4 Wide and O4 Pro Air Units)
- Receiver: Serial ELRS 2.4 GHz
- Recommended Battery: 580–680 mAh 4S 95C (XT30)
- Flight Time: Approx. 8 min. 30 sec. with LAVA II 4S 580 mAh / up to 10 min. 30 sec. with LAVA II 4S 680 mAh
Shipping Contents
- 1 × Pavo20 Pro II 4S Brushless Whoop Quadcopter (without video system, with ELRS 2.4 GHz)
- 1 × Top Plate for O4 Air Unit Bracket II
- 1 × Bottom Plate for O4 Air Unit Bracket II
- 1 × O4 Air Unit Pro Mount
- 4 × Gemfan D2.2 3-Blade Propellers
- 1 × USB-C to SH1.0 Adapter
- 1 × SH1.0 4-Pin Adapter Cable
- 1 × NightFire RGB LED Strip (500 mm)
- 6 × Vibration Dampers for O4 Air Unit Pro Mount (6.6 mm)
- 6 × Vibration Dampers for O4 Air Unit Bracket (8.8 mm)
- 6 × Damping Pads for O4 Air Unit Bracket (1.5 mm)
- 6 × M2 × 10 mm Hex Socket Head Cap Screws
- 6 × M2 × 4 mm Hex Socket Button Head Screws
- 6 × M2 × 4 mm Self-Tapping Hex Socket Screws
- 8 × M1.4 × 6 mm Phillips Flat Head Screws with Washers
- 2 × 5.8 GHz VTX Antennas
- 1 × 5.8 GHz VTX Antenna Mount
- 1 × GPS Mount (22 × 22 mm)
- 1 × GPS Mount (14 × 17 mm)
- 2 × GPS Foam Pads
- 1 × Phillips Screwdriver
- 1 × H1.5 Hex Screwdriver
Data sheet
- 72.6g
- 1104 Brushless
- 4S
- 2.2"
- 5500
- ELRS
- None
Configurator
Radio Control
|
RadioMaster TX16S Mark II Max Radio Controller (ELRS) |
|
|
RadioMaster Zorro ELRS Radio Controller |
|
|
RadioMaster Boxer MAX Radio Controller (ELRS) |
|
|
RadioMaster Boxer CRUSH Radio Controller (ELRS) |
|
|
RadioMaster Boxer Radio Controller (ELRS) |
|
|
RadioMaster Pocket CRUSH Radio Controller (ELRS) |
|
|
RadioMaster Pocket Radio Controller (ELRS) |
|
|
RadioMaster TX15 Radio Controller (ELRS) |
|
|
RadioMaster TX15 MAX Radio Controller (ELRS) |
|
|
RadioMaster TX16S Mk3 Radio Controller (ELRS) |
|
|
RadioMaster TX16S Mk3 MAX Radio Controller (ELRS) |
|
|
RadioMaster T8L Radio Controller (ELRS) |
|
| None |