Flywoo GOKU F405 HD 1-2S 12A ELRS AIO V2

The GOKU F405 HD 1-2S 12A ELRS AIO V2 is a high-performance, all-in-one flight controller designed for micro FPV drones. It features an F405 processor, 12A BLHeli_S ESC, and built-in ExpressLRS (ELRS) for reliable, low-latency control. Tailored for HD VTX setups, it includes an 8MB black box for data logging, a barometer, and a current sensor for precise telemetry. Its ICM42688 gyro ensures smooth flight, while the socket-style motor connections and plug-and-play O3 design simplify installation and troubleshooting, offering an effortless setup experience with maximum efficiency.

Supporting 1-2S batteries, this AIO board is perfect for efficient HD FPV builds, combining compactness, functionality, and user-friendly installation. Whether you're a beginner or an expert, the GOKU F405 HD delivers the right balance of advanced features and ease of use, making it ideal for those looking to optimize their FPV drones with minimal hassle.

Features

• Type-C Design: Utilizes Type-C , more convenient and reliable connections.
• New Power Supply: Features 9V 2A BEC , effectively preventing power outages in the O3 Air unit due to voltage dropping .
• Plug-and-Play O3 Port: Direct plug design for O3 air unit eliminates complex soldering steps
• Motor Socket Design: Adopts socket connections for motors to facilitate quick replacements and upgrades.
• Multifunctional Design: Integrates a serial ELRS 2.4G receiver, 8MB black box, barometer, and current sensor, reserves 2 full UARTs and 1 standard SBUS port, supporting connections with various devices like GPS, HD VTX, and external receivers.

Specifications

Flight Controller

• BF Flight Controller Firmware: FLYWOOF405S_AIO
• INAV Firmware: FLYWOOF405HD
• MCU: STM32F405BGA
• BEC: 5V 2A/9V 2A
• Flash: 8M
• LED: 2*WS2812
• Barometer: DPS310/SPL06
• Gyro: ICM42688P
• Motor: M1-M4 OUTPUT I2C: SCL/SDA
• Uarts: 1,2,3,4,5,6
• connector： Type-C
• OSD: NO
• Hole: 25.5*25.5-3mm
• Size: 30*30mm
• Weight: 4.9g

Onboard 4in1 ESC

• Built-in 1S/2S 12A BL_S 4in1 ESC
• Support Oneshot125, Oneshot42, Multishot,
• Dshot150, Dshot300, Dshot600
• Input Voltage: 1-2S Lipo
• Firmware: BLHELI_S
• Firmware: Z_H_30_REV16.7

Onboard ELRS RX

• ESP8285 MCU
• SX1280IMLTRT RF Module
• Frequency Range: 2400 MHz to 2500 MHz
• Maximum receive refresh rate: 500Hz
• Minimum receiver refresh rate: 25Hz Seiral:
• UART 1
• Firmware: Flywoo EL24P 2400 RX
• Version: 3.X.X

Package Contents

• 1 x Flywoo GOKU F405 HD 1-2S 12A ELRS AIO V2
• 1 x XT30 Power Cable
• 1 x Flywoo ELRS 2.4g Minimortal PCB T Antenna UFL
• 1 x DJI O3 Connection Cable
• 1 x PH 2.0 Battery Lead
• 1 x capacitor
• 4 x JST Straight Socket
• 4 x M2*10 screw
• 4 x M2 nuts
• 4 x M2 shock-absorbing ball