HDZero Whoop V2 Bundle

The HDZero Whoop V2 Bundle offers a compact digital FPV solution for whoops and micro drones. It combines the improved Whoop V2 VTX with the lightweight Nano V3 camera, delivering low-latency digital video transmission.

Compared to the previous Whoop Lite, the Whoop V2 VTX features a reinforced circuit board, a secured U.FL antenna connector, and pre-soldered connection wires. These improvements increase durability and simplify installation. With an input voltage range of 3 to 12.6 V, the VTX is suitable for various 1S to 3S setups.

The included Nano V3 Camera weighs just 2.2 g and delivers good image quality even in challenging lighting conditions, thanks to its highly sensitive CMOS sensor.

Key Features:

• Ultra-Lightweight Design: The Nano V3 Camera weighs just 2.2 grams, and when paired with the Whoop Lite VTX at 5.4 grams and a 0.4-gram dipole antenna, the total system weight is approximately 8 grams. This ensures minimal impact on your drone's agility and flight time.

• High-Resolution Video: Delivers crisp 720p video at 60 frames per second, providing clear and detailed visuals for an enhanced flying experience.

• Wide Field of View: The Nano V3 Camera offers a diagonal field of view of 155°, horizontal 126°, and vertical 94°, allowing for expansive and immersive visuals during flight.

• Versatile Power Input: Supports a wide voltage range from 1S to 3S (3.3V to 12.6V), offering flexibility across various drone setups. For 3S input, it's recommended to use a capacitor to ensure stable performance.

• Smart Audio Support: Enables easy control of VTX settings directly from your transmitter, simplifying adjustments during flight.

Specifications:

• Whoop Lite VTX:

  • Video Resolution: 720p/60 fps, 540p/90 fps, 1080p/30 fps
  • Frequency: 5.725-5.850GHz
  • Input Voltage: 3-12.6 V (1S-3S)
  • Dimensions: 31x31mm (inner 29x29mm)
  • Mounting Pattern: 25.5x25.2mm M2 soft mounting
  • Weight: 5.4 grams
  • Power Consumption: 5-6W
  • RF Connector: U.FL (secured)
  • Video Connector: MIPI
  • FC Protocol: Smart Audio Support/MSP

• Nano V3 Camera:

  • Sensor Size: 1/2 inch ultra-high sensitive CMOS
  • Resolution: 720p at 60fps
  • Field of View (4:3): Diagonal 155°, Horizontal 126°, Vertical 94°
  • Dimensions: 14x16x14mm
  • Weight: 2.2 grams
  • Input Power: 3.3V
  • Power Consumption: 0.5W

IMPORTANT: The Whoop V2 VTX does not feature reverse polarity protection. Always ensure correct polarity when connecting the power supply.

When powered by a 5 V BEC, the BEC must be capable of supplying at least 1.5 A. For direct operation with a 3S battery, HDZero recommends using an additional capacitor.

Package Includes:

• 1 × HDZero Nano V3 Camera
• 1 × HDZero Whoop V2 VTX
• 1 × Dipole Antenna
• 1 × 40 mm MIPI Cable
• 4 × Rubber Grommets (M3 to M2)
• 3 × U.FL Retaining Screws
• 1 × Metal Antenna Retaining Bracket