GEPRC Cinebot 30 HD O3 6S CineWhoop Drone (PNP/DJI)

331002

3" 6S Cinewhoop with DJI O3 Air Unit for cinematic FPV. PNP version for DJI Remote 2.

More details

GEPRC

Delivery: 1-2 working days

569.00 CHF

incl. 8.1% VAT

Data sheet

Manufacturer GEPRC
Label Cinebot 30 HD O3 6S
Weight 237.7g (w/o battery)
Motors 1804 Brushless
Cell configuration 6S
Suitable propeller 3"
KV 2450
Continuous Current 45A
Receiver DJI Remote 2, No Receiver
FPV System HD DJI

More info

Since DJI released a new generation of O3 AIR Unit FPV high-definition video transmission system, the GEPRC team has followed closely to make the latest set of O3 AIR Unit system, Cinebot30 HD O3 AIR Unit version.

  

Cinebot 30 is a new generation FPV camera drone developed by GEPRC team. The aluminum parts of the camera are still made of high strength 7075 aircraft aluminum alloy materials. The TPU shock-absorbing pad is designed on the mount structure, which can excellently isolate the high-frequency vibration of the fuselage, making the camera still jelly-free even in high-speed flight. The installation of the Air Unit is designed to allow the O3 to be fully installed in the fuselage without interfering with the Type-C USB data cable connected to the Air Unit to read video data. The O3 Air Unit is the most advanced FPV system on the market today. It can transmit 1080P 60fps real-time images and simultaneously record up to 4K 60fps images with anti-shake effect.

 

The top plate has been improved, which is compatible with the camera base attached by 4-hole screws, so the Cinebot30 can attach a full-size GoPro camera very well, and can achieve a battery life of 5 minutes and 30 seconds. However, the GEPRC team recommends flying with the Naked GoPro 10, which gives you up to 10 minutes and 30 seconds of battery life.

 

High-strength, one-piece, injection-molded propeller guard and high-toughness, high-impact PC material for injection molding. A ring-shaped cob light strip is embedded in the propeller guard, and the light effect is carefully matched. High strength grain cut carbon fiber sheet, the overall strength of the fuselage is improved once again!

 

The Cinebot30 is equipped with a powerful 1804 motor with optimized magnetic circuit and high torque, which can easily handle very low altitude shots. The HQ propeller T76mm*3 provides the lowest noise level in its class. The GEP-F722-45A AIO v2 flight controller provides greater power redundancy and makes it easier to handle unexpected situations.

 

Tuned by GEPRC professionals, the Cinebot30 is a Cinematic FPV that performs equally well in both indoor and outdoor flights. The Cinebot30 opens up endless possibilities for your drone footage!

 

Specifications

  • Weight: 237.7g (without battery)
  • FC&ESC: GEP-F722-45A AIO V2
  • Motors: SPEEDX2 1804-2450KV
  • Props: HQ prop T76mm
  • Camera/VTX: DJI O3
  • Frame: GEP-CT30 O3
  • Receiver: DJI O3 (for DJI Remote 2)
  • Connector: XT60
  • Battery: Recommended 6S 850-1100mA (NOT included)

   

Shipping contents

  • 1 x Cinebot30 HD Quadcopter
  • 2 x HQProp T76MM (Pairs)
  • 1 x Battery strap M15x200mm
  • 1 x Battery strap M15x220mm
  • 2 x Battery Silicone Pads
  • 1 x screw combination
  • 1 x screwdriver combination
  • 1 x GoPro camera mount holder
  • 1 x Antenna fixed tube

Choose accessories

Remote Control

Mode 2

DJI Remote 2 - FPV RC Radio Drone Controller DJI Remote 2 - FPV RC Radio Drone Controller
169.00 CHF
  None

FPV Goggles

DJI Goggles 2 DJI Goggles 2
569.05 CHF
DJI Goggles Integra DJI Goggles Integra
436.05 CHF
  None

30 other products in the same category: