Toothpick F4 4S AIO Brushless Flight Controller 20A V5 (BLHeli_S)

122008

The new 20A 4S F4 AIO FC (BLHeli_S) V5 for Toothpick Drones.

More details

BetaFPV

Delivery: 1-2 working days

79.00 CHF

incl. 8.1% VAT

Data sheet

Manufacturer BetaFPV
Weight 8.35g
Gyroscope ICM 42688
OSD Yes
Continuous Current 20A
Burst Current 25A
Mounting Holes 25.5x25.5mm
Input Voltage 2S, 3S, 4S
Integrated PDB Yes
Current Sensor Yes
ESC Outputs 4
FC Software Betaflight
SD Card Slot No
FC Type Brushless
MCU STM32F405
ESC Protocol Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
ESC Typ 4-in-1

More info

Based on the F405 2-4S 20A Brushless Flight Controller V4, the F405 4S 20A Toothpick Brushless Flight Controller V5 applies a new ICM42688 gyro and ESC chip that comes with BLUEJAY ESC firmware so it supports bidirectional D-shot. In addition to plug&play ports for the receiver and HD Digitial VTX the same as the V4 board, the V5 board is made with a rational layout for easy solder and preventing solder from jumping to another pad and shorting components.

 

Features

  • Not only is the flight controller board made with a rational layout but it is also designed with larger solder pads. It is very easy for pilots to solder external electronics.
  • The flight controller is capable of handling 20A continuous current and reaching 25A peak current due to high-quality MOSFETs.
  • Soldering motor wires to pad directly allows lower resistance for more current on motors. Besides, solder pads are reinforced by thick copper and edge plating process, ensuring a solid value and durable use.
  • Reserving the UART ports layout, UART3 for RX, UART4 for HD digital VTX, UART6 for Analog VTX and UART1 for spare use, it is more convenient for pilots to solder.
  • Come with a 25.5*25.5mm whoop mounting pattern, this board can be added to both the toothpick drone and the cinematic whoop quadcopter frame like Pavo25 and X-knight 35.

   

Specifications FC

  • CPU: STM32F405RGT6
  • Six-Axis: ICM42688 (SPI connection)
  • Size33x40.5mm (25.5mm mounting holes)
  • Firmware versionbetaflight_4.3.1_BETAFPVF405
  • OSD: Built-in Betaflight OSD (OSD chip: AT7456E)
  • Receiver: SBUS/CRSF/DSMX
  • Connecter: XT30, it also can be changed to XT60 if pilots needs.
  • Weight: 8.35g

 

Specifications ESC

  • Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
  • ESC Chip: SILABS EFM8BB21F16G-C
  • Input voltage: 2S-4S Lipo
  • Continue current: 20A
  • Peak current: 25A
  • Firmware: G_H_20_48_v0.16.HEX (Default BLUEJAY), BLHeli_S (Optional)

    

Delivery Content

  • 1 x F405 4S 20A Toothpick Brushless Flight Controller V5 BLHeli_S (ICM42688)
  • 1 x Cable Pigtail (XT30)
  • 4 x M2x12mm screws
  • 8 x M2 nuts
  • 4 x Anti-vibration rubber dampers
  • 1 x 6-Pin Connector for Digital VTX
  • 1 x 4-Pin Connector for Rx

28 other products in the same category: