Toothpick F4 2-4S AIO Brushless Flight Controller 12A (BLHeli_S)

126010

The new 12A 2-4S F4 AIO FC (BLHeli_S) was customized specifically for use in Toothpick Drones with the help of KababFPV.

More details

BetaFPV

Delivery: 1-2 working days

CHF 47.90

incl. 7.7% VAT

Data sheet

Manufacturer BetaFPV
Weight 6.5g
Gyroscope MPU6000
OSD Yes
Continuous Current 12A
Mounting Holes 26.5x26.5mm
Input Voltage 4S, 3S, 2S
Integrated PDB Yes
Current Sensor Yes
ESC Outputs 4
FC Software Betaflight
SD Card Slot No
FC Type Brushless
MCU STM32F411CEU6
ESC Protocol Support PPM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
ESC Typ 4-in-1

More info

With the real holes, side-mount USB and all solder pads of the edge of FC, greatly reducing installation time and improving ease of self-assembly. The weight saving of the all in one board makes this ideal for tight builds - using the included Anti-vibration rubber dampers for mini stack height.

 

Features

  • New layout with whoop mounting pattern, designed real holes instead of notches, customized for Toothpick Drone
  • Adopt USB side-mount, easy to plug in
  • All of the solder pads are at the edge of FC, which is a convenience to solder
  • Double-sided motor solder pad. Pins pad and wires pad are both built-in for motors connection
  • Integrated with a Betaflight MATEKF411 processor FC, Betaflight OSD, and 2-4S 12A ESC, support 4S battery for fast-flying experience

 

Reccomended Battery / Motor Combo

  • 2S 1103 11000KV / 0802 12000KV / 08028 12000KV
  • 3S 1103 8000KV / 1105 6000KV
  • 4S 1105 5000KV / 1106 5000KV

 

Specifications FC

  • CPU: STM32F411CEU6 (100MHz )
  • Six-Axis: MPU6000 (SPI connection)
  • Size32.5x32.5mm (26.5mm mounting holes)
  • Firmware version: Betaflight MATEKF411 (MK41)
  • OSDBuilt-in BetaFlight OSD (OSD chip: AT7456E)
  • ReceiverSupport Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver/DSMX Receiver.
  • Support programmable LED like WS2812 etc
  • Built-in current sensor
  • Weight: 6.5g

 

Specifications ESC

  • Support BLheli/BLHELI_S suite Pass-through ready
  • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
  • Input voltage: 2S-4S Lipo
  • Continue current: 12A
  • Peak current: 15A
  • Firmware: BLHELI_S
  • ProcessorSILABS EFM8BB21F16G-C
  • Motor Connectors: 1.25mm header pins connector
  • Factory firmware: G-H-30-16.7

    

Delivery Content

  • 1 x Toothpick F4 2-4S AIO brushless flight controller
  • 1 x Cable Pigtail (XT30)
  • 4 x M2x10mm screws
  • 4 x M2 nuts
  • 4 x Anti-vibration rubber dampers

30 other products in the same category: