Matek F722-Mini Flight Controller

142009

The F722-Mini comes with the latest features such as dual gyro choices (MPU6000, ICM20602), VTX power switcher, dual camera switching, and 2-8S input voltage!

More details

Matek Systems

Delivery: 1-2 working days

CHF 49.90

incl. 7.7% VAT

Data sheet

Manufacturer Matek
Weight 10g
Gyroscope ICM 20602, MPU6000
OSD Yes
Mounting Holes 20x20mm, 30.5x30.5mm
Input Voltage 2S, 3S, 4S, 5S, 6S, 7S, 8S
Integrated PDB No
Current Sensor No
ESC Outputs 4, 8
FC Software Betaflight, iNav
SD Card Slot No
Integrated Flash Memory 32MB
FC Type Brushless
MCU STM32F722RET6

More info

An F7 20x20 flight controller that can also be converted to a 30.5x30.5 mounting pattern? Sign us up! The Matek F722-Mini contains heavyweight power inside a tiny package.

  

The F722-Mini comes with the latest features such as dual gyro choices (MPU6000, ICM20602), VTX power switcher, dual camera switching, and 2-8S input voltage!

  

For more information and wiring diagrams please check out Matek product page

    

Features

  • Vbat filtered output power for VTX, Switchable via AUX (modes tab-user1)
  • Dual Camera image switchable via AUX (modes tab-user2)
  • Convertible 20mm to 30.5mm mounting

  

Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 & ICM20602, Dual Gyros built-in (SPI)
  • OSD: AT7456E (SPI)
  • Blackbox: 32M-byte Flash memory (SPI)
  • Baro: No barometer built-in. support external barometer module (I2C)
  • Interface:
    • 5x Uarts (1,2,3,4,6) with build-in inversion
    • 1x Softserial supported
    • 8x Dshot/Proshot/oneshot outputs
    • 1x I2C
    • 1x SH1.0_8pin connector (Vbat/G/Curr/R6/S1/S2/S3/S4)
    • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Camera control: Yes
  • Smartaudio & Tramp VTX protocol: Yes
  • WS2812 Led Strip: Yes
  • Beeper: Yes
  • RSSI: Yes
  • Additional ADC for INAV analog airspeed
  • Power:
    • Input: 6~36V (2~8S LiPo)
    • BEC: 5V 2A cont. (Max.3A)
    • LDO 3.3V: Max.200mA
    • Battery Voltage Sensor: 1:10 (Scale 110)
    • No Current Sensor built-in, supports external current sensor of PDB/4in1
  • FC Firmware:
    • BetaFlight / INAV
    • Target: MATEKF722SE
  • Physical:
    • Mounting:
      • 20 x 20mm/Φ3mm with Silicon Grommets
      • 20 x 20mm/Φ2mm with Silicon & Brass Grommets
      • 30.5 x 30.5mm/Φ3mm with Conversion Plate and Silicon Grommets
    • Dimensions: 28 x 28 mm
    • Weight: 5g

  

Shipping Contents

  • 1 x FC F722-mini
  • 1 x 20mm to 30.5mm conversion plate
  • 6 x Silicon grommets M4 to M3
  • 6 x Brass grommets M3 to M2
  • 1 x SH1.0_8pin cable 5cm
  • 2 x SH1.0_8pin connectors

30 other products in the same category: