KISS ESC 32A

113006

KISS ESC 2-5S 24A Race Edition - 32bit brushless motor controller.

More details

Flyduino

Delivery: out of stock

CHF 33.90

incl. 7.7% VAT

Data sheet

Size 19x27 mm
Manufacturer Flyduino
Label KISS ESC 32A
Weight 3.6g
Cell configuration 3S, 4S, 5S, 6S, 2S
Continuous Current 32A
Burst Current 40A, aktiv limitiert (10 sek.)
ESC Typ Single ESC

More info

Coming in at the same size as the very popular KISS ESC 24A (19x27mm), they are now rated for 32A with an active current protection at 40A. They can handle 2-5S without external capacitors and 6S with a minimum 220µF 50V. Besides the high rated current, it also supports DSHOT 2400!

 

The ESC makes use of the latest STM32L4 which is an ARM-Cortex M4 with a floatingpoint unit. It can measure the current more accurate and much faster than the F0, which makes it much safer against overload.

 

To achieve that smooth and well-known KISS feeling it makes use of sinHybrid which is a mix of sinusoidal and backEMF. It keeps all benefits of using backEMF, like running every motor without knowing it and can also adapt to motor characteristics change (after a crash) where full sinwave would get problems. But it also switches the motor phases with sinwave form, so it produces less noise and the motor can run much smoother and produce fewer vibrations. To not lose any KV (which would be normal with sinwave) it fades to trapezoidal after about 90% throttle.

 

Features

  • 32-bit ARM Cortex M4 MCU @80Mhz
  • Telemetry capability (voltage, current, temperature, rpm)
  • Over-current protection (measures the current and reduces it to max 40A) 
  • Over-temperature protection (reduces the max power if hotter than 100°C) 
  •  sinHybrid :: Sinwave/BackEMF Hybrid Commutation for smoother running. 
  • Dshot 2400 (Full resolution of 2000 steps takes only 6.5µs)
  • Supports all common Dshot commands like turtle mode, 3D mode and rotation direction change. 
  • Expanded adaptive auto timing (3,25-30° advance on each commutation)
  • For Race Multicopters (32A continuous also with weak cooling) 
  • High max. RPM (500.000ERpm, 71.400Rpm with a 14Pole Motor) 
  • Small size (19 x 27 mm) 
  • Accurate RPM control (2000 steps using Dshot) 
  • No additional capacitor needed for 3-5S. Add a min. 220µF (330µF recommended) min. 50V Cap for 6S usage! 
  • Very fast throttle response 
  • Linear throttle response 
  • Active freewheeling (low diode losses) 
  • Regenerative braking 
  • 3-6S LiPo (6s with capacitor) 
  • Dshot 100-2400, Oneshot42, Oneshot125 and normal (25 – 500Hz) PWM auto detected. 

 

Specifications

  • Size: 19x27mm 
  • Operating voltage: 9-30V (3-6s) 
  • Maximum continuous current: 32A 
  • Peak Current: 40A, actively limited 

 

Shipping Contents

  • 1 x KISS ESC 32A

Accessories

30 other products in the same category: