Matek - HUBOSD8 with STOSD8, Current Sensor & Dual BEC

Features

• 2oz copper, 4-layers 1.6mm PCB
• 1x Battery Input, 4x ESC Outputs, 2x BEC 5V Outputs, 2x BEC 12V Outputs
• Camera signal and Gnd pads, VTX Signal and Gnd pads
• 1x Serial port (RC, TX, Gnd)

Specifications

• General:
• Input voltage range (3S-5S operation): 8 - 21VDC
• PDB 4x30A (max 4x35A)
• Regulated 5V and 12V Outputs
• Current sensor 140A
• Built-in STOSD8
• PDB (ESC outputs):
• Continuous current: 30A per output
• Peak current (10 seconds/minute): 35A per output
• BEC 5V output:
• Designed for RC Receivers, Flight controllers, OSD, and Servos
• DC/DC synchronous buck regulator
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 2 Amps (max 2.5A 10s/Minute)
• Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
• Short-circuit tolerant (5 seconds/minute)
• BEC 12V output:
• Linear regulator, very low noise. LC Filter is needless
• Designed for Video TX or FPV Cam
• Voltage: 12.0 +/- 0.3VDC (4-5S operation)
• Continuous current: 500mA@16V IN, 400mA@20V IN
• Short-circuit tolerant (2 seconds/minute)
• If the Battery is 3S LiPo, Output Voltage=3S LiPo Voltage -1V
• Current Sensor:
• 140A
• If current >140A, STOSD displays 140A
• Physical:
• Dimensions: 46 x 36 x 4mm
• Weight: 8.5g
• Mounting holes 30.5mm square spacing, ø3mm

Pls visit STOSD website for more info: http://www.stosd.com

Shipping Contents

• 1 x HUBOSD8 with STOSD8, Current Sensor & Dual BEC